If you add metal wall art to your room, it can change the vibe, both inside and outside. This kind of decor is super tough but still looks good so lots of people like it for decorating spaces. But when you're putting up metal art on your walls, you gotta think it through and use the right way to do it. This way, it stays safe and looks great. I'll show you all the must-knows, stuff you need, and the best ways to showcase your metal wall art, no matter where you hang it.

Metal wall art decor shows up in a bunch of styles, like detailed sculptures or sharp geometric patterns. These artsy bits can go with tons of different decor vibes, from super modern to old-school country feels. When you start putting metal wall art in your place, you gotta be precise and get the hang of the top ways to do it.

We're gonna dig into all the cool stuff about putting up metal wall art decor in this piece. Kicking off with picking a spot that's just right, we'll chat about the kind of tools you need to hang it up. We're tackling how to slap them on walls both inside and out tackling the special issues each spot can throw at you. Plus, we'll look at other ways to put up your metal art if you're not into making holes in your walls.

Stick with the tips we're throwing down here, and you'll be all set to get your metal wall art looking all kinds of awesome. So, you ready to hop into this metal art hanging adventure? We'll make sure your cool pieces hang tight and look great no matter where you put 'em.

Picking the Best Spot for Your Metal Wall Art

So you've got this super cool metal wall art, yeah? You wanna make sure you pick the best spot to show it off. The perfect spot's gonna make your art pop and look right at home in your space. For hanging it up, think about these things:

Checking Out Your Wall Space

Kick things off by scoping out your walls for the right spot. You're looking for places that ain't too cluttered with other decor or furniture. Big bare walls are kind of like a blank canvas waiting for your art to shine. Grab that tape measure check how big your art is, and match it up with the space on the wall—that way, you know it'll fit just right.

Looking at the Light

When light plays off your metal wall decor, the whole look changes big time. Sun rays can turn up the wow factor making reflections and shadows that beef up the texture and make stuff look deeper. Do you plan to hang the art inside? Best to pop it near a window or somewhere with good lighting to show it off. And for stuff you wanna hang outside, keep in mind how the sun's gonna dance with the metal as the day rolls on.

Kicking It with What You've Got

Make sure your metal wall art is vibing with what’s already in the room. You gotta eyeball the colors, style, and what the space is all about before you decide where it's gonna hang. Find ways to make it all click or throw in a bit of clash if you’re into that.

Checking Out Different Spots

Look at your metal wall art from all the different angles it'll be seen from. What's up when you walk into the place? Is it hung at the right height to catch your eye? If you're slapping this thing outside, you gotta think about how it's gonna show off from different spots in your garden or on your deck.

Paying Attention to the Nitty-Gritty Bits

Sure, having something look good is cool, but don't forget the nitty-gritty stuff. Make sure where you put it won't get in the way or be a tripping risk. Like, don't put heavyweight metal art up over where folks sit or somewhere people walk all the time and could knock into it.

Making Stuff Stand Out

Make your metal wall art decor the star of the show or boost important spots in your spot. Big, showy metal pieces are perfect as the main attraction in living rooms spots where you eat, or outside hangouts. If you got smaller metal art, you could group 'em to start a cool gallery wall or jazz up certain parts of a room.

Thinking About Size and Balance

Your metal wall art's size ought to match the wall and the furniture near it. If you pick a tiny piece for a big wall, it might seem invisible, but a huge piece can be too much for a small area. You wanna aim for a cool vibe that goes well with the room's size.

By giving these aspects a proper look, you're sure to pick the just-right spot to hang your metal wall art. This savvy move will make sure your piece doesn't just look amazing, but also bumps up the style big time, be it inside or outside.

Must-Have Kit for Mounting Metal Wall Art

Getting started on putting up your metal wall art means you gotta have the correct gear ready. With all the essential bit and pieces at your fingertips, you'll nail the setup and get it done with ease. Check out this must-have equipment list:

Tools for Measuring and Scoring

  1. Grab a tape measure to get the right size for that wall space and your art's dimensions.

  2. Take a pencil and dot those spots where the art's gonna hang.

  3. A level makes sure your metal wall art isn't wonky.

  4. Use a stud finder to find those solid studs in the wall for a sturdy hang.

Gear to Mount Your Art

  1. Wall anchors are your best pals for hanging up beefier metal art.

  2. Picking the right screws is key—they gotta match the art's weight and the wall stuff.

  3. Picture hanging hooks, they're perfect for not-so-heavy metal art.

  4. D-rings or sawtooth hangers are already on your metal art's backside.

  5. If there's no handy hardware on your art just twist some wire to make a loop.

Stuff You'll Need to Put It Up

  1. Drill: You'll need it to make starter holes and put in wall fasteners.

  2. Screwdriver: It tightens screws and tweaks stuff you hang.

  3. Hammer: It's good when setting up some wall fasteners or picture hooks.

  4. Pliers: They're pretty handy for twisting wires or fiddling with metal bits.

Safety Gear

  1. Safety goggles: Keep your peepers safe when you're making holes or whacking stuff.

  2. Work mitts: They protect your paws when you're dealing with sharp metal art pieces.

  3. Dust mask: Slap this on to not breathe in wall dust while drilling.

Extras for Putting Stuff Up Outside

  1. Hardware that resists the weather: Pick stainless steel or galvanized stuff so it won't rust.

  2. A good sealant: This keeps your metal art safe from moisture and whatever the weather throws at it.

  3. Glue that's good for outside: To stick stuff up on outside walls in different ways.

Stuff That's Also Handy

  1. A tall step ladder: It lets you reach the high bits of the wall .

  2. Someone to help out: Having another person can make a huge difference when you're dealing with big stuff.

  3. Gear to clean up: You gotta prep the wall and make your metal art shiny and clean before it goes up.

  4. Soft felt pads: These prevent your wall from getting all scratched up by the backside of your metal art.

Getting these tools and stuff ready means you'll nail the job of putting up your metal wall art. Make sure you pick top-notch gear that can handle your art's heaviness and bigness, and think about what your wall needs too. Armed with the right stuff, you can hang your metal wall art without a hitch. It'll look super rad in your space!

Get Your Wall Ready for Metal Art Hanging

Okay, before you start sticking up your metal wall art, it's super important to get the wall up to scratch. Doing this makes everything stick like it should and keeps your art and wall safe. So here's what you gotta do to get a solid start for your metal wall art:

Checking Out the Wall

Get started by looking over the wall you wanna hang your metal art on. Keep your eyes peeled for any trouble like cracks, holes, or chipped paint. You gotta fix those up before you go ahead and put up your metal artwork for wall so it's got a solid place to sit.

Giving the Wall a Clean

Making sure the wall is squeaky clean is super important for sticking the hardware on right and making it look nice. Do these cleaning moves:

  1. Wipe off the wall with a soft rag or a dust brush to get rid of any dust bunnies.

  2. For a deeper clean, grab some gentle soap water and a moist rag.

  3. Skip the strong cleaners; they can mess up your wall's look.

  4. Make sure the wall's bone dry before you move on to putting up the piece.

Fixing Wall Blemishes

Notice any wall wear and tear during your check-up? Set aside some moments to tackle these issues:

  1. Patch up tiny holes or fractures using spackle with a scraper.

  2. Once the spackle's solid, smooth out the fixed spots by sanding.

  3. Grab a wall repair kit for bigger gaps, as it gives a solid fix.

  4. Once you've fixed the spots, give them a paint job to blend them in with the original wall hue.

Finding Wall Studs

You'll wanna ensure heavy metal artworks for walls hold up well on walls by anchoring them to studs. Find studs in the area you wanna hang stuff using a stud finder:

  1. Glide the stud finder across the wall side to side until you hit a stud.

  2. Use a pencil to mark the middle of each stud.

  3. Check for studs by giving the wall a soft knock and keeping an ear out for a dense sound.

Back to blog